经过生产验证的，复杂的半导体IP核

半导体电路设计IP及配套交付件

T2M › › Display Port v1.4 Rx PHY & Controller IP

Display Port v1.4 Rx PHY & Controller IP

概述和功能介绍

Display port 1.4 Rx IP supports Channel bandwidth Up to 5.4bps per channel (HBR2), Programmable analog characteristics like CDR Bandwidth, Equalizer strength, Terminator resistor, BGR voltage also covers the Testability like PLL only test, Analog signal monitor.

 Display-Port-v1.4-Rx-PHY-Controller-IP-supplier-in-asia-pacific 

功能描述
  • DisplayPort version 1.4 compliant receiver
  • PHY supports 1.62Gbps (RBR) to 5.4Gbps (HBR2) bit rate
  • Integrated 100-ohm termination resistors with common-mode biasing
  • Integrated equalizer with tunable strength
  • eDP version 1.4a / DP version 1.3 compliant
  • receiver Supports HDCP1.4 and HDCP2.2(Optional)
  • Consists of configurable (4/2/1) link channels and one AUX channel
  • Supports 1.62Gbps (RBR), 5.4Gbps (HBR2) and 8.1 Gbps (HBR3) bit rate
  • Supports main link operation with 1 or 2 or 4 lanes Supports both Default and Enhanced Framing Mode Supports SST mode
  • Supports video packet and audio packet
  • Supports 18 / 24 bit RGB digital video output format Master I2C interface for DDC connection
  • Interface to external HDCP key storage
  • Configuration registers programmable via AMBA interface
  • Configurable analog characteristics
  • CDR bandwidth
  • Equalizer strength
  • Terminator resistance
  • BGR voltage
  • Regulator voltage
  • Support PLL test and internal analog signal monitor
  • 1.8V/0.9V power supply

Deliverables

  • Verilog RTL or netlist source code of LINK controller.
  • Abstracted timing models for synthesis and STA
  • Timing constrains for synthesis and physical layout
  • Behavioral Verilog Model, simulation test bench, run control scripts, and test stimuli
  • Physical design database
  • Integration guidelines
  • Reference software sample code
索取数据表