经过生产验证的，复杂的半导体IP核

半导体电路设计IP及配套交付件

T2M › MIPI › MIPI RFFE SPI Slave Controller IP

MIPI RFFE SPI Slave Controller IP

概述和功能介绍

MIPI RFFE SPI Slave interface provides full support for the two-wire MIPI RFFE synchronous serial interface with SPI overlay, compatible with RFFE 2.1 and SPI Block Guide V04.01 specification. Through its RFFE compatibility, it provides a simple interface to a wide range of low-cost devices. MIPI RFFE SPI Slave IP is proven in multiple ASIC. The host interface of the MIPI RFFE/SPI can be simple interface or can be AMBA AHB, AMBA AHB-Lite, AMBA APB, AMBA AXI, AMBA AXI-Lite, Tilelink, OCP, VCI, Avalon, PLB, Wishbone or custom protocol.

MIPI-RFFE-SPI-Slave-Controller-silicon-proven-ip-provider-in-china

 

功能描述
  • Compliant with 3.0 MIPI RFFE Specification and SPI
  • Block Guide V04.01 Specification
  • Full MIPI RFFE Slave functionality.
  • Supports following frames • Command Frame • Data/Address Frame • No Response Frame
  • Supports extended register read/writes
  • Supports interrupt summary and identification command sequence
  • Support Trigger and Extended trigger modes
  • Support Masked write command sequence
  • Supports Timed Trigger
  • Supports Mappable Triggers
  • Support Synchronous read
  • Support Normal and Secondary operation mode
  • Support USID Programming Procedure 1,2 and 3
  • Support Group slave ID
  • Supports device enumeration
  • Supports Half-Speed Data Response (HSDR) Accesses
  • Supports Full Command Sequence at Half-Speed SCLK
  • Supports Delayed Read-back
  • Supports Reserved Register Allocations in Basic Address Space (0x1C – 0x1F)
  • Supports Reserved Register Allocations in Extended Address Space (0x20 – 0x3F)
  • Supports Write Slave State via PWR_MODE bits
  • Supports Read Slave State via PWR_MODE bits
  • Supports Read PRODUCT_ID, MANUFACTURER_ID and USID from reserved registers.
  • Support Interrupt capable slave
  • Supports Extended Frequency Range up to 52 MHz
  • Supports the following Error detections • Undefined command frame • Command frame with parity error • Command frame length error • Address frame with parity error • Data frame with parity error
  • Read and Writ of unused register
  • Read using the broadcast ID or a GSID
  • Full SPI Slave functionality
  • Supports following frames for SPI • Sleep Frame • Wakeup Frame • Write Frame • Read Frame
  • Supports 8 bit and 16 bit address for SPI.

Deliverables

  • The MIPI RFFE SPI Slave interface is available in Source and netlist products.
  • The Source product is delivered in plain text Verilog. If needed VHDL, SystemC code can also be provided.
  • Easy to use Verilog Test Environment with Verilog Testcases
  • Lint, CDC, Synthesis, Simulation Scripts with waiver files
  • IP-XACT RDL generated address map
  • Firmware code and Linux driver package
  • Documentation contains User's Guide and Release notes.
索取数据表