概述和功能介绍

eDP/DP Tx PHY is designed for chips that perform eDP/DP data communication while operating at low power consumption. The main link is a multi-gigabit transmitter macro which enable speed up to 4.0Gbps data transmitter with optimized power and die size, also it can be easily fabricated and implemented in a video system. The AUX channel is a half-duplex, bidirectional channel consisting of one differential pair, supporting the bit rate of about 1Mbps.

Macro consists of multi-main link transmitter channels, AUX channel, one PLL and bias-gen unit. The main link transmitter performs dedicated P2S, clock generator, driver with pre-emphasis and self-test. Each of the channels can be turned off individually.

功能描述

• Support data rate of main link : 0.6Gbps~4.0Gbps
• Utilize per-lane 10/20bit parallel interface for main link
• Support Spread Spectrum clock generation: -
• 5000ppm@31.5KHz
• AC coupling
• One shared PLL for all the lanes
• Individual power down for each lane
• Support 0~9dB programmable 2-tap FFE (feed forward equalization) for main link
• AUX channel included
•  Embedded BIST
• Support wire bonding and flip chip package
• Reliability
• Life Time : 10 years, with Average
• Temperature up to 110 degC
• Availability : 100%
• ESD (HBM) : over 2000V

Deliverables

• GDSII & layer map
• Place-Route views (.LEF)
• Liberty library (.lib)
• Verilog behaviour model
• Netlist & SDF timing
• Layout guidelines, application notes
• LVS/DRC verification reports